Home & plants · MARC guide
How to Choose a 3D-Printed Planter
Published 30 September 2026
Measure the space and planting setup first. Compare MARC planter designs without assuming drainage, waterproofing or an included inner pot.
The short answer
Choose the design you like, then check its listed dimensions against your shelf and the pot you intend to use. Do not assume that a printed planter has drainage holes or is suitable for direct planting; confirm the opening and watering setup before ordering.
Start with your plant, not just the outer shape
Measure the nursery pot you already have, including its widest rim. A planter's external length, width and height do not tell you its internal opening or usable depth. If the product page does not state those measurements, ask MARC to confirm them for that particular piece.
For a new plant, choose the nursery pot and growth space first. It is easier to match a decorative outer piece to a known pot than to guess whether a root ball will fit a sculptural form.
Decide how you will water it
Some MARC planter listings specifically ask buyers to confirm drainage and planting requirements. Unless a product listing confirms drainage, waterproofing and direct-planting suitability, do not treat those features as included. A removable inner pot can be a practical setup if its dimensions fit the opening; remove it to water and let excess water drain away from furniture.
If you want to plant directly into the printed piece, ask about drainage, a saucer and the recommended care for that exact design before checkout.
Check the shelf as carefully as the planter
Measure the available depth, width and height at the spot where the planter will sit. Leave room to lift out an inner pot and for the plant itself. A product that fits a tabletop footprint may still be too tall for a shelf once foliage is added.
MARC's Crumpled Paper, Yawning Cat, Hydro Square and Evergreen give you different sculptural directions. Open each product page for its current measurements and photographs; ask about any missing internal dimensions before deciding.